Tuesday, September 24, 2019
Reflecting on a moral problem ( affirmative action) Essay
Reflecting on a moral problem ( affirmative action) - Essay Example Other countries similarly enlightened adopted the same principles of this affirmative action law but termed it differently, such as ââ¬Å"positive discriminationâ⬠in the United Kingdom in which discrimination was given a positive and beneficial connotation or in Canada where it is called as employment equity to mean everybody has equal chances at getting employed if a person has the same qualities, qualifications, credentials, and capabilities as another person. In all these countries, the main idea was to take positive action that will equalize everybody. In reference to the Women's Liberation Movement (or feminism for short), the same laws in principle were adopted and likewise applied to women to have the same opportunities as men. Some countries adopted a different system altogether such as using quotas to allocate a certain number of slots to members of some minority groups. The same idea of affirmative action was soon introduced to schools and universities in admitting s tudents for enrollment. In this paper, it will be argued how procedural affirmative action is the better of the two variants. ... The only remaining criterion for a job applicant is his or her qualifications for the position. In a sense, this first side of affirmative action is negatively stated, that to achieve the noble aims of affirmative action, any employer should ignore the applicant's race, creed, or color. This first side is what is now called as the procedural affirmative action (Cahn 14). On the other hand, the second side is now more nuanced as it carefully takes into its consideration the very things which were supposed to be ignored or not considered such as an applicant's race, creed, or color; the elements which will make affirmative action a success is to embrace the same criteria which were to be ignored or discarded as mentioned earlier. It is now incumbent upon a potential employer to carefully take into consideration the same things like race, creed, or color when evaluating an applicant. This is what is required now by the so-called preferential affirmative action by paying very close atten tion to the same criteria. These two seemingly contradictory aspects of the affirmative action program can be problematic for those desirous to comply with its provisions and objectives although both two aims aspire for the same result of equality in opportunities. The main problem is whether to use the same set of criteria and then whether to grant compensatory advantages to group members of minorities who were discriminated against. This flies in the face of the ideals of affirmative action which is to allow everybody to compete fairly on an equal footing against everybody else. This implies preference for diversity to enrich everybody's experience but the philosophical debate on this issue has
Monday, September 23, 2019
Influences of Innovation at Apple Inc Case Study
Influences of Innovation at Apple Inc - Case Study Example The present case study dwells on the innovative features of the business at Apple Inc. The discussion commences from its very beginning and ends with the contemporary strategies and business of the firm. Apple Inc., (Apple) is a US - based multinational corporation that focuses on design and manufacture of consumer electronics and closely related software products. The company was established in Cupertino, California on April 1, 1976, engaged in designing, developing, selling and supporting a wide range of personal computers, portable media players, mobile phones, computer software, computer hardware and hardware accessories. Till 2007, the firm opened around 200 retail stores across five countries and one online store through which hardware and software products are being sold (Retail Stores). In the year 2008, the firm was awarded the best corporate performer organized by the famous business magazine, Business Week. (Best Performer Award 2008). Apple started its innovation journey with its first Apple computer in the year 1976. After that the company introduced the Apple II microcomputer on April 16, 1977 and it was different from its major rivals, the TRS-80 and Commodore PET, mainly because of its color graphics and an open architecture. In 1983, the company introduced the Lisa, the first commercial personal computer to employ a Graphical User Interface (GUI). In the early 2000s, Apple expanded its focus on software and included professional and consumer video, music, and photo production solutions with a view to promote its products as a "digital hub". Apple developed its own operating system to run on its hardware such as Macs, Mac OS X and Mac OS X v10.5 Leopard. Apple also independently developed computer software titles for its Mac OS X operating system. Apple also offered a range of professional software titles. On May 19, 2001, Apple launched its first official Apple retail stores (Appendix I) in Virginia and California and continued to set up more stores in the US and other countries. Apple retail stores are a chain of stores owned and operated solely by Apple Inc., dealing in computers and consumer electronics. On October 23, 2001, Apple introduced the iPod digital music player equipped with a 5 GB hard drive and a monochrome screen. The current models can store up to 160 GB and display video, play games, and support a wide range of third-party add-on devices. Apple added new models of iPod(R) touch, after the success of the iPod touch (Appendix II) launched in 2007. Another innovative milestone in the launch of Apple products was the Apple iPhone. It was introduced by the company in late June 2007 at the top price of $599 with 8GB and a less price of $499 with 4GB. iPhone (Appendix III) was one of the most anticipated electronic devices of the decade (Apple Inc History). AppleCare is a customer service program designed by the company to meet the needs of individuals and businesses. In addition, there are numerous online resources within the AppleCare Support website that provide valuable information and instructions. Apple's self-servicing account program is designed for institutions and businesses - for
Sunday, September 22, 2019
Developmental psychology, Essay Example for Free
Developmental psychology, Essay It is important to keep evaluating learning activities as the childââ¬â¢s needs may change or your planning may not work and may need changing. Planning, teaching and evaluation is a cycle which gives structure to the learning process. Whilst in the planning process I need to know the learning objectives so that you are clear about that the pupils are expected to achieve. When evaluating you will need to look at whether the children were able to meet the leaning objectives in their task. If a child was to complete a task quickly this should be recorded. 1. 2 Weakness 1. à When planning a work activity I always take into account the childrenââ¬â¢s learning needs and levels, for example you could have a child in your group which lacks concentration and needs a more practical approach in order to show interest and for the task to be successful. For example: Child A ââ¬â Lacks concentration Child B ââ¬â Does not enjoy Literacy Child C ââ¬â Find tasks difficult 1. 4 ââ¬â All lesson plans should be made available to the LSAââ¬â¢s before the class starts, even if you do not have time to look at the plan you should discuss with the teacher what you are to do. Learning objectives ââ¬â You must always be clear on the learning objectives of the lesson or what pupils are expected to be able to do. Leaning recourses required ââ¬â The lesson plan should detail any materials which are different from those which are normally found in the classroom. Own role in supporting learning activities ââ¬â It should be made clear what you are required to do whether itââ¬â¢s supporting a group or an individual. Specific information ââ¬â you should have access to school reports about pupils learning and be able to refer to them if required whether its paper or electronic based. Sometimes changes need to be made to plan and this may happen last minute so you will need to be flexible. Any changes made to the childrenââ¬â¢s routine may affect their behaviour so you need to take this into consideration. 1. 5 2. 3 We should always be made aware of the health and safety issues especially when working with children; it is the main duty of all school employees to keep the children safe. Young children or children with additional needs may not be aware of certain hazards. Schools also have security measures in place such as gates and a signing in policy for all visitors. If you ever come across a unfamiliar face within the school grounds you should always approach them in a polite manor by saying. ââ¬ËCan I help you? ââ¬â¢ All storage areas should be kept tidy so they do not cause a hazard they should also be locked, spaces like cleaning cupboard especially as they store a lot of hazardous materials and can sometimes be left untidy as staff may not have enough time to tidy up or may not be sure where certain items should be. You must always make sure that no fire exits in the classrooms are blocked by chairs / tables, they should always be accessible. Describe the sorts of problems that might occur when supporting learning activities, and how to deal with these: Noise Sometimes during classes children can become distracted by noise from within the classroom and from outside (such as another classroom, or people on the hallway). I help to combat this problem by closing the doors and any windows open to the noise, and also by reminding children to work as quietly as possible and raise their hand to speak rather than shout out. Insufficient resources Many of the activities set by the teacher involve the use of multiple resources e. g. books, pencils crayons, scissors, glue, rulers etc. Unfortunately there are not always enough resources for every student, resulting in there being a delay in the commencement of work (due to trying to locate extra supplies). This problem is managed by preparing for the lesson before it begins, ensuring there are sufficient resources for the class, and also by encouraging children to help to and share with each other whenever possible. Having an inclusive class with a wide spectrum of abilities another problem which can occur when supporting learning activities, is ensuring that the all children are engaged, involved and fully understanding the task that has been set when there is such a wide spectrum of abilities. This can be dealt with in several ways, such as splitting the class into ability based groups, encouraging high ability children to help those who are struggling to keep pace (this also helps to keep the class working on a similar level), and also by setting achievable targets for work. Shy students Children may suffer from shyness which can affect their ability to work individually (such as being worried about being wrong), and get involved with the class as a whole or participate in group work. Weather ââ¬â The weather can always be a distraction to the children, if itââ¬â¢s hot and sunny out the children can get hot and agitated. 5. 1 The reasons why it is important to evaluate learning activities are: â⬠¢ To see what is working and what needs removing or changing â⬠¢ To assess how the activities are being delivered and how they could be improved â⬠¢ To see how the activities are being received by the participants Evaluation is important as it helps out when planning and helps you to think about the learning that has taken place. Spending time going through the learning activities and seeing how students have responded to a certain task or question, can really help re-shape it for future classes. It is also important to look back at the learning objects so you can measure what the children have learned. If you do not think carefully about learning objectives at the planning stage, it will not always be possible to evaluate whether pupils have achieved them. Learning objectives need to be clear for this to be possible. Learners must understand what the outcomes mean. â⬠¢ They must be achievable. â⬠¢ We must be able to assess pupils against them. Evaluating helps you to see if something is succeeding or may need changing. If students whizzed through the activity and then looked rather bored then it would be obvious that the task was a bit too easy and not really suitable or beneficial for that group. Therefore you would need to try and make it more engaging and stimulating, perhaps by making it more difficult or time-consuming so the students really have to work to complete it. If the activities are taking longer than expected and you can see that the students are really struggling, things again would need to be addressed. Students may not meet the learning objective, but they could have a real enthusiasm for the subject and have participated fully in all aspects of the lesson. You will need to record this somewhere. 5. 2 5. 2 and 5. 4 Upon completion of the task, I then provided constructive feedback to the class teacher, and feedback on her participation and progress. I explained that the child was: à · Very pleased to be given individual support and was positively responsive to the support (smiled, listened intently, and produced the work expected through understanding) à · After a couple of examples was able to achieve the objective of drawing on the hands onto the clock face on the task sheet given à · Succeeded in progressing in the learning activity à · Went back into the classroom with a big proud smile as she had enjoyed the task and benefited from the support. I informed the teacher that she responded well to reassurance and lots of positive praise and was very happy to receive a sticker after the task. I explained that she had completed the given learning activity objective. I gave constructive feedback that she 5. 3 Difficulties which I came across As I have not worked with this particular group before I found it hard to see what stage each child was at and what support each child needed and as the task was outside we faced a lot of distractions. Spring Work Aims / Objectives Children to identify features of spring Looking for signs of spring using senses I can see / smell / touch Share ideas With the whiteboards ââ¬â Create senses poem I can see the blue sky Recourses White Boards White board pens Ipad ââ¬â take pictures Evaluation The children found it a little hard to concentrate as they were taken outside and they were easily distracted ie. Wanted to run around and touch things.
Saturday, September 21, 2019
Classification Of Network Topology
Classification Of Network Topology The term topology refers that way in which the end points, or stations, attached to the network are interconnected or it is the arrangements of systems in a computer network. It can be either physical or logical. The physical topology refers that, how a network is placed in a physical way and it will include the devices, installation and location. Logical topology refers that how a data transfers in a network as opposed to its design. The network topology can be categorized into bus, ring, star, tree and mesh. Hybrid networks (They are the complex networks, which can be built of two or more topologies together). Bus Topology A bus topology is characterized by the use of a multi point medium. A long and single cable acts as a backbone to connect all the devices in a network. In a bus topology, all computers are stations attaching through the tap (an interfacing hardware to connect to the network) and it connects directly to the bus network. Datas are transmitting and receiving to the bus, by the duplex actions between the tap and the device. Devices in the bus topology send a broadcast message to the other device for communications. But the proposed device can only accepts and processes the messages. Advantages Bus topology can install very easily on a network. Cabling will be less compare to other topologies because of the main backbone cable laid efficiently in the network path. Bus topology suited for a small network. If one computer fails in the network, the other computers are not affected they will continue to work. It is also less expensive than star topology. Disadvantages The cable length will limited and there by limits the number of stations. The main cable (backbone cable) fails, and then the entire network will fail. It is very difficult to trouble shoot. Maintenance cost is very high in a long run. Terminators are required for both the ends of the cable. Ring topology The ring topology is the network consists of dedicated point to point connection and a set of repeaters in a closed loop. Signals passing through ring in a single direction until they reach to its final destination. It may be clock wise or anti clock wise. Datas are transmitted in the form of frames. These topologies are used in school campuses and some office buildings. Advantages It performs better than star topology under heavy work load For managing the connection between the computers, there is no need for the network server. It is cheaper than star topology because of less wiring. By adding the token ring in the network, can create large network. Very order network because all the devices has a access to the token ring and opportunity to transmit. Disadvantages A failure or break in the ring, it can disable the entire network. It is much slower than an Ethernet network with under normal load. Any moves, changes and ads of the devices can affect the network. Network connection devices like (Network adapter cards and MAU) are much more expense than Ethernet cards. Star Topology Star topology is the network in which each station is directly connected to a central connecting node called hub. In star topology all the devices are not directly connected to one another. All the devices are connecting to the central server (switching hub). This topology does not enable the direct traffic between the devices in the network. A controller act as the interface between the devices. A star topology feature, each device needs only one link and one input/output port to connect the number devices in the network. This type of topology is used in local area networks (LAN) and sometimes high speed LAN often uses a star topology with central hub. Advantages If anyone connection is fails in the network, it will not affect the entire network. Only that connection or link affected. It is easy to identify the fault and fault isolation. Easy to expand the network in the star topology. No failure to the network when connecting or removing devices. It is very easy to manage because of its simplicity in the function. Disadvantages In a star topology, if the central connecting device goes down, the entire network will fails. It requires more cable length compared to the linear bus topology. Star topology is more expensive than bus topology because o the connection ports like hub. Tree Topology Tree topology is the generalized form of the bus topology. It integrates the multiple star topologies together on to a bus. The data transmission of the tree topology, through the cables with closed loops. The transmission medium is a branching cable with no closed loops. The layout of the tree topology is beginning at the head end. These layouts have many branches and these are quite complex layouts in the topology. Any transmission from the device is going through the medium and it can receive by all other devices in the tree topology network. Tree Topology will give the expansion of the existing network. Advantages Tree topology is well supported by the hardware and software vendors. Point to point wiring for each and every segments of the network. It is the best topology for the branched networks. Disadvantages It is more expensive because more hubs are required to install the network. Tree topology is entirely depends upon the backbone line, if it fails then the entire network would fail. It is very difficult to configure and wire than other network topologies. In a tree topology, the length of network depends on the type of cable being used. Mesh Topology In a mesh topology, every device has connected to each other or a dedicated point to point link to every other device. (Dedicated term means that the traffic links only between the two devices it connects). To find the number of physical links in a fully connected mesh network with n nodes, we first consider that each node must be connected to other node. Node 1 must be connected to n-1nodes, node 2 must be connected to n-1nodes, and finally node n must be connected n-1 nodes. If each physical link in the network can allow the communication in both directions, we can divide the number of links by 2.In other words we can say that in a mesh topology, we need n (n-1)/2. Suppose if we are connecting 15 nodes in a mesh topology, then the number of cables required; CN = n (n-1)/2 CN = Number of cables = 15 (15 1)/2 n = Node = 15*14/2 = 15*7 = 105 Therefore, the total number of cables required for connecting 15 nodes = 105. Advantages There is no traffic problem because of the dedicated link in the mesh network. Mesh topology is very strong. If any link becomes not active it does not deactivate the entire system. Point-to-point links make full identification and fault isolation easy. Security or privacy for data travels along the dedicated line. Network can be expanded without any disruptions to the users. Disadvantages Installation and reconnection are difficult. Mesh topology required more cabling and the number input/output ports comparing with other network topologies. Sheer bulk of the wiring can be greater than the available space can accommodate. The hardware required to connect each link can be prohibitively expensive. Hybrid Topology A network can be hybrid, which uses two or more network topologies together in a network. An example of hybrid technology is the star ring network. OSI Model in the Network The OSI model was developed by the ISO (International Organization for Standardization) in 1947, as a model for a computer protocol architecture and as a frame work for developing protocol standards. The purpose of the OSI model is show how the communications are going through in a network between different systems. The OSI model is not a protocol; it is a model for understanding a network architecture .This model is flexible, very strong and interoperable. The OSI model is a layered frame work for the design of network systems that allows communication between all types of computer systems. OSI model contains of seven layers, each of which defines a part of the process moving information across a network. The OSI reference model has been divided into two categories according to their specific functions in the network architecture; upper layers and lower layers. The lower layers are used to allow traffic through the network to the other system. The other four layers are used to complete the process to the other system. The Advantages of the OSI model are given below It helps the user to understand the whole features involved in networking OSI model gives a better understanding to the users that how a software and hardware components working together in the networks. Troubleshooting in the OSI model is easier as it breaks the network into usable layers The basic functional relationship terms are defined so that it can be used by network professional on another network The users can understand new technologies as they develop in this model Upper Layers of the OSI Models are; Application layer Presentation layer Session layer The upper layers have act as an interface between the end user and the applications. It consists of all the issues about the application, presentation and sessions and these layers are applied in software only. The application layer is more close to the end user. Examples of upper layer technologies in the OSI model are SNMP, FTP, and WWW etc. Lower Layers of the OSI Model Transport Layer Network Layer Data link Layer Physical Layer These layers provide network specific functions like data transport issues (flow control, addressing and routing). The bottom layers in the OSI model (physical layer and data link layer) can use in software and hardware also. TCP, UDP, IP, IPX are some examples for the lower layers. Application layer The application layer act as the interface to the end users can access the network. Application layer is the layer the user sees in contest of loading an application such as e-mail, supporting the file transfer, ability to print on a network, surfing the World Wide Web etc. These layer have another specific functions like network virtual terminal, access and management, mail services and directory services. Protocols used in this layer are SMTP, Telnet, FTP, and SNMP. Presentation layer In the presentation layer, the application formats the data to be sent out on the network depending on the presentation layer. The presentation allows applications to read and understand the data or message sent.The presentation layer is also responsible for the translation, compression and encryption. Messages are sending between the layers. Presentation layer will translate data into understandable for the transmission. This layer also handles the encryption, decryption, data compression and decompression. Session layer The session layer is the network dialog controller. It establishes, maintains and synchronizes the interaction among communicating systems. This layer is responsible for opening, using and closing session. It handles the remote procedure calls. Session layers are communication through the gateways and application interfaces. Session layer will also places check points in the data flow. Examples for the session layer are SQL, ASP, and RPC etc. Transport layer The transport layer offers end to end communication between the two end networks devices in a network. The transport layer is also responsible for the delivery of a message from one process to another. A process is an application program running on a host. The transport layer ensures that the whole message arrives intact and in order, overseeing both error control and flow control at the source-to-destination level. Transport layer gives a type of address to the data called port address. Transport layer also have the responsibilities of detecting transmission error and the proper sequence. This layer divides the messages into smaller packets and it controls the data flow. Network layer A Network layer provides the end to end (source to destination) delivery of a packet, across the multiple networks (links). This layer ensures that each packet gets from its point of origin to its final destination. Network layer gives logical addressing, so that endpoint (receiver) can be identified. During a packet delivery process it send messages and report errors. This layer also defines the routing works and how routers can learn how a packet can deliver. Examples for network layer protocols are IP, IPX, and TCMP etc. Data link layer A Data link layer transforms the physical layer, a raw transmission facility, to a reliable link. It makes the physical layer appear error-free to the upper layer. This layer divides the datas into frames and gives the physical address. It uses the MAC address for define a hardware or data link address .Data link layer handles the flow control, error control and the access control. This layer can identify the specific computer on the network. Data link layer contains two sub layers; Logical Link Control and Medium Access Control. LLC is the upper layer and which maintain and establish the communication links to the device. And it also responsible for the frame error control and addressing.MAC is the lower sub layer of the data link layer. It controls how the devices sharing the media channel. Physical layer A Physical layer is used to define the connector and interface conditions, also the medium requirements which are cables. The Electrical, Mechanical, Procedural and Functional conditions are also defined by sending a bit stream on the network. This layer defines the characteristics and different types of medium. Physical layer defines the data rate i.e. the duration of a bit or how long they will exist. Physical layer will tell the transmission mode between two devices. Examples for the physical layers are Cables, hubs, switches, repeaters etc. Conclusion Network topologies helps the user to understand the whole features involved in networking and also how the software hardware components together in networks. Network topology provides easy to trouble shooting the OSI models. Users can understand very well about the new technologies in the OSI model. Resources I have searched various websites and books for gathering information about the network topologies and OSI model. Strength of the project I have studied the assignment very deeply and did very hard work for doing this assignment. I collected different type of resources for getting the information for this project like books, journals and websites etc. The project has been completed with the support of my lecture by giving some useful tips. Effective time scheduling really helps me for doing the project. Weaknesses of the project It was very hard to find out the important information for this assignment. Lack of experience for doing these kinds of assignment. What I learned from this project Project planning is very much important for doing a successful project. If we can spend relatively more time on our project, it will be much better for the project. I have learnt how to work under pressure and how to complete the given project in a scheduled time.
Friday, September 20, 2019
Human Trafficking: Modern-Day Slavery Essays -- Sex Trafficking, 2015
Slavery is a modern, pervasive problem. Human trafficking has been found in every state in America (humantrafficking.org). It seems that most Americans likely live within a comfortable drive of someone who is being exploited through human trafficking. There is a growing trend in human trafficking toward sexual exploitation (Bennetts, 2011). The Information Age has helped to create new opportunities for sex trafficking to flourish. Information drives many modern experiences. A wealth of information, on seemingly any topic, is at the fingertips of any person with Internet access. Society has grown accustomed to real-time solutions, instant gratification, and anonymity. New technologies tempt the depth of human curiosity, sometimes resulting in opaque consumer markets that bear heavy human costs. One such market is that of sex trafficking. I will demonstrate how this issue is not being treated with the appropriate seriousness, how sex trafficking results in egregious violations of human rights and losses of human autonomy. The Internet plays a key role in sex trafficking, and we, behind our computers and in our communities can play vital roles in stemming the tide of sex trafficking. While the American governmentââ¬â¢s current response to combat sex trafficking has been more robust of late, it is imperative that results follow from these improved efforts. Sex -trafficking, defined by the U.S. Department of Stateââ¬â¢s Victims of Trafficking and Violence Protection Act of 2000, is, ââ¬Å"the recruitment, harboring, transportation, provision, or obtaining of a person for the purpose of a commercial sex actâ⬠(TVPA, 2000). Many sex trafficking victims are transported and concealed in establishments that offer legal sex acts, like strip clubs, pornography production, escort services, and so on. Traffickers buy and run legitimate businesses, like massage parlors, modeling studios, and adult book stores, in order to conceal and harbor victims with the goal of selling them (humantrafficking.org). Sex trafficking is not hidden behind closed doors, but is disguised as a regular business for anyone who is interested. Sex-trafficking victims are diverse: U.S. citizens, foreign nationals, women, men and children all make sex slaves (U.S. Department of State PITF). Victims are trafficked in three ways: within their countries of origin, from country-to-country, and to destinat... ... "Trafficking in Persons: U.S. Policy and Issues for Congress." Trends in Organized Crime 14.2-3 (2011): 267-71. Trafficking in Persons: U.S. Policy and Issues for Congress. Congressional Research Service, 19 Feb. 2013. Web. 12 Oct. 2014. . Stutler, Ana. "The Connections Between Pornography and Sex Trafficking." Covenant Eyes. 7 Sept. 2011. Web. 10 Nov. 2014. pornography-and-sex-trafficking/>. U.S. Department of State. The Presidentââ¬â¢s Interagency Task Force to Monitor and Combat Trafficking in Persons. Rep. Apr. 2014. Web. Oct. 2014. . United States. U.S. National Archives & Records Administration. National Archives and Records Administration. National Archives and Records Administration, n.d. Web. 25 Oct. 2014. . "Victims of Trafficking and Violence Protection Act of 2000." U.S. Department of State. U.S. Department of State, 28 Oct. 2000. Web. 14 Oct. 2014. .
Thursday, September 19, 2019
Modern Japanese Painting :: essays papers
Modern Japanese Painting Among my peers, art is often overlooked and is seldomly appreciated. Perhaps, with the subsequent information your interest will grow as mine did. During the end of the nineteenth century, also during the time of modern development in painting techniques, Japan entered the international world. Their culture made slight changes due to opposing virtues and renovating ideals pertaining to painting. Europe possessed many of the modernistic, innovative principles and inspired the Japanese tremendously. With the overwhelming influence of the European painting techniques, the Japanese style remained almost unaltered, yet accompanied with modernized standards. The European style migrated to Japan and imposed on the traditional and ancient methods. As a result, the patrons of the ancient style denied the effectual, European ways of artistic expression. Thus, the Japanese culture divided into two worlds: Traditional and Modern Western. The European form was not completely contradictory to the Japanese. However, the color hues, organization of motifs, and personal expression used showed great contrast. These elements were absent in Japanese paintings. The Japanese were considered archaic and anile according to the Europeans (Baker 199). Their artistic expression and reasons for the subject matter usage were constantly changing and refitting the most recent alterations in society (Gregg 757). They strive to find new ways of "representing the intrinsic beauty of nature as a higher synthesis of modern realism and characterism" (Microsoft). Symbolism and realism, "classical restraint and romantic passion" were elements attempting to apply itself to the primitive style and were used to reveal significant affinities (Microsoft). Japanese painting, concerning artistic expression, was the preferred art form and was used to deal with mental tensions and inner thoughts. They were taught the "various rules of objective realism such as linear and aerial perspective, and shading" ("Japan" 959). Their themes encompassed life, mother nature (like the Europeans, but passà ©), movement and character. The inevitable outcome was displayed by the traditional Japanese by objecting and attempting to overcome the conflict between the dual civilizations ("Japan" 958). The concurrent practices took place in a time of complex life situations, and agonies became too acute to be dealt with a traditional art form (Baker 201). In fact, the Western style actually allowed the Japanese to escape the restricted attributes such painting with definition and without perspective or visible space. It gave them more opportunities to show elaborate, uncapped emotion without the risk of condemnation by ancestral painters (Baker 193). In other words, the new method was their scapegoat or moat away from the mainland, as if it was an excuse to
Wednesday, September 18, 2019
Cheetah :: essays research papers
Cheetah (Acinonyx Jubatus) à à à à à I chose to do my television project on the cheetah which I saw on the Discovery Channel. Although I knew some interesting characteristics on the cheetah, I did happen to discover some facts I did not know. Those of which are written in the rest of the paper along with some facts I thought were pretty cool. à à à à à The cheetah is an endangered species and has been for quit some time. This is mainly due to poachers who hunt and kill this animal for itââ¬â¢s illustrious fur of different colors. Itââ¬â¢s coat is very coarse and a goldish color including some round black spots for camouflage. It has ââ¬Å"tear stripsâ⬠running from itââ¬â¢s eyes to itââ¬â¢s nose. The next part was surprising to me in that the cheetah is only 44-53 inches long. On the TV they always seem bigger somehow. And the tail is about 26-33 inches long! Their average weight is 86-143 pounds, surprisingly light for such a powerful animal. à à à à à Itââ¬â¢s low weight, it seems, is what allows it have itââ¬â¢s high top speed of sixty miles per hour. It is regarded as one the fastest hunters in the world and of course, the fastest land animal in existence. I also found that itââ¬â¢s habitat is in the grassy plains of Africa. This is definitely a great place for it to hide based on itââ¬â¢s coat color. It is because of this combination of tall grass and camouflage coat which allows the cheetah to stalk and catch itââ¬â¢s prey. These usually consist of gazelles, wild boar, or pretty much any animal it can handle. However, the regular range for itââ¬â¢s food is about 88 pounds. The cheetah then drags the meat to itââ¬â¢s ââ¬Å"homeâ⬠, away from prying animals, and feasts on it immediately.
Subscribe to:
Posts (Atom)